Used beverage cans (UBCs) are commonly compressed into bales for transportation and storage. Before these bales can be used for aluminum melting, they must be broken apart and processed to remove steel, plastic, and other contaminants. A UBC recycling pretreatment line combines bale breaking, impurity removal, crushing, and metal separation to produce cleaner aluminum scrap for downstream de-coating and melting.
Aluminum UBC Recycling Pretreatment Process The process starts with a bale-breaking system that loosens compressed cans and distributes the material for separation. A zigzag air separator removes lightweight contaminants, such as plastic and other light impurities, while a magnetic separator extracts ferrous metals, including steel. The remaining mixture then enters the first eddy current separator, which recovers aluminum and other non-ferrous metals from the residual waste stream.
Aluminum UBC Recycling – Debaling | Impurity Removal | Shredding
The recovered material is subsequently fed into a hammer crusher for size reduction and further liberation of attached contaminants. This step prepares the material for more effective separation. A second eddy current separator then processes the crushed output, recovering additional non-ferrous metals and helping remove residual impurities. The separated aluminum scrap is collected for the next recycling stage.
By combining two-stage eddy current separation with air classification, magnetic separation, and crushing, the system improves the removal of different types of contaminants throughout the process. The resulting aluminum fraction is better prepared for de-coating and melting, although its final quality depends on the composition of the incoming bales and the operating configuration.
When selecting a UBC pretreatment line, the key factors include bale dimensions, processing capacity, impurity levels, and required output quality. These determine the appropriate equipment configuration and help ensure that the recovered aluminum meets the requirements of the downstream recycling process.
👉 Contact Tel: +86 199 0388 6476
👉 Contact Email: hnhonest.zack@gmail.com
Have this news-related demand?
We can help you!
Connect with us anytime! Whether you have questions, need project assistance, or seek general help, our dedicated team is ready to assist. Fill out the form, and we'll promptly prioritize your satisfaction. We eagerly anticipate serving you.
If you have any requirement or suggestion, please fill in the form and send to us, thanks!
Email: hnhonest.zack@gmail.com
WhatsApp: +86 19903886476
Address: No. 403, South Of Floor 4, No. 172, Fifth Street, Zhengzhou Economic And Technological Development Zone Zhengzhou Henan China
Equipment R&D Factory
Customers Worldwide
Over 20 years manufacturing and 14 years export